Introduction:

FKM Free Flow FP01 is one kind of Fluoroelastomer with shape of powder, it could be used as processing agent of engineering plastic like HDPE, LLDPE and PP, in order to improve processing performance.

Performance and Characteristic:

1. Remove or reduce the surface defect (like fracture of melt),improve the smooth and lightness of surface of finished product;

2. Reduce the gel of film and membrane

3. Reduce pressure of mold, energy consumption as well as temperature;

4. It will also reduce surface melting viscosity, remove the die accumulation.

5. It will reduce production cost and improve the production efficiency. (under same mold pressure and temperature)

Appearance:

White or yellowish powder

Application:

Processing aid for blow membrane, cast film; sheet and pipe extrusion; wire and cable, jacket extrusion

Physical property:

Density: 1.75--1.78g/cm3

Particle size: 600--1000μm

Moisture content %: ≤0.3%.

Processing guide:

It is suggested that firstly make master batch through extruder with Powder FKM content 2%-3%, then mix with polymer for processing at certain ratio

Shelf life:

6 months and should be stored in clean, dry place with temperature below 30℃.

Package:

Sealed in PE bag and packed in drum with net weight 20kgs.